Universal Key-In-Box Transbonder Bypass
- Universal bypass for most remote start systems
- Compatible with any factory RF immobilizer or transponder system, including GM Passkey3
- Temporarily overrides the factory immobilizer
- Maintains integrity of factory anti-theft system
- Requires permanent key mount (into BP-03 box)
- Includes 1 PBC ring and 1 closed input antenna wire
- Warranty: 1 year
- Priced / each
Installation:
- The BP-03 requires an active key from your vehicle to be installed inside the immobilizer interface module, then mounted underneath your vehicle's steering column.
Wiring:
2-Pin Harness: Power/Ground harness
- Red (+)12 Volt Input: connect this wire to a fused source of constant 12 volt
- Black (-) Chassis Ground: connect this wire to the vehicle's chassis ground
2 Pin keysense harness
- (Positive Keysense)
- Connect Orange wire to positive (+) keyense wire on vehicle
- Connect Green wire to ground (-)
- (Negative keysense)
- Connect Green wire to Negative (-) keyense wire on vehicle
- Connect Orange wire to positive 12v constant
2-Pin Harness: Antenna harness
- Black: both of these are antenna ring wires (BP-02R)
Important Note:
- One of your car's transponder keys will be permanently installed in the BP-03 module.
- You can buy an extra key through your dealer and have it programmed to work with your car's immobilizer.
- Ask your dealer if keys can be programmed individually, some vehicle manufacturers require that all keys be reprogrammed at one time.
